Home Investments Falling VD-Ak

Falling VD-Ak

by britainsnews

The main purpose of the putty of VD-Ak is to equalize uneven surfaces, or the elimination of defects during external or internal work. A positive property is that the formed coating has a high coefficient of adhesion to the surface on which it is applied is easy to polish, due to its structure, is not subjected to the negative effects of the environment.

The sequence of actions when working with putty VD-Ak. Before starting work, it is necessary to prepare the working surface, clean it of the old coating, and then moisturize it. Before applying, putty must be brought to the condition of the paste, adding water and mixing it. Next, apply putty with an even layer (up to 1. 5 mm.) on the wall, using a rubber or metal spatula. After that, it is necessary to let the putty dry, then it will need to be sanded and primed.

Basic precautions when performing work with putty VD-Ak. It is forbidden to mix it with some paints. During the work of the work, the room must be ventilated. Use protective equipment to avoid putty hits on the skin.

You may also like

© BritainNews – britainsnews.com, 2017-2023. All Right Reserved.